Can You Push-Start An Automatic Car?

Affiliate banner

Turbo Hackers is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

No, you cannot push start an automatic vehicle. Only manual vehicles can be push started.

When you are push starting a vehicle, you are trying to override the starter. To do this, you need to turn the engine over until it starts.

On an automatic vehicle, you would need to turn the flexplate enough times to start the vehicle. This is impossible with an automatic vehicle.

With an automatic vehicle, you can’t turn the flexplate manually. This is because automatic transmissions use a torque converter to power the transmission, which is bolted onto the flexplate. In addition to the torque converter, the crankshaft is also attached to the flexplate.

The only way to crank your automatic transmission is to jump-start it.

How Do You Push Start A Manual Car?

You can only push start manual cars. But how do you do it. Below are the different ways you can push-start a manual car.

Method 1: Push Starting Your Car Alone

Remember, when trying to push-start your vehicle, someone should always be inside the driver seat. When your alone, this is only possible if you can find a small hill that will help you reach around 5 to 10 mph. 

Step 1: Find a clear area for your vehicle to roll with no possible interference. Find a small hill or a small steep hill that will help you reach 5 to 10 mph. 

Step 2: Make sure you have at least 100 yards of free space to push-start your vehicle safely.

Step 3: Turn your key to the on position and keep it here during the entire process. 

Step 4: Once you’re on the hill, you can release the brake and start to roll down the hill.   

Step 4: Put the vehicle in 2nd gear. Once the vehicle is around 5 to 10 mph, release the clutch. 

Step 5: After releasing the clutch, you should hear your engine turn over. Your engine should start after releasing the clutch. If your engine doesn’t start, then you should repeat steps one through four. 

Method 2: Push starting your Car with Another Person

In most cases, you will likely need another person to assist you. This is because one person needs to push the car, and the other needs to steer and start the vehicle. 

Remember, someone needs to be steering the vehicle at all times to ensure safety. 

Step 1: Find a clear area for your vehicle to roll with no interference.

Step 2: Ideally, you want to find somewhere that is flat or with a small incline downwards. You need at least 100 yards of free space to jump start your vehicle successfully. 

Step 3: Turn your key to the on position and keep it here during the entire process. 

Step 4: Put the gear in 2nd gear and start to push your vehicle. 

Step 5: Once your car reaches between 5 and 10 mph, release your clutch quickly. 

Step 6: After releasing the clutch, you should hear your engine turn over. Your engine should start after releasing the clutch. If your engine doesn’t start, then you should repeat steps one through four. 

Method 3: Push Starting Your Car Alone on a Flat Surface

This is the least ideal situation when trying to push-start your vehicle. This situation is dangerous and should only be done in the right conditions.

Below are some of the conditions that you need to find before trying to push-start your vehicle alone. 

  • Look for a flat surface 
  • You should do this where there are no cars around for at least 100 yards. 
  • Your car should have a proper wheel alignment and not experience any steering wheel pool. 

 

Step 1: Find a flat surface with no cars around for at least 100 yards. 

Step 2: Turn your key to the on position and keep it here during the entire process.

Step 3: Put your car in neutral, release the parking brake, and make sure your steering wheel is straight. 

Step 4: Standing outside of your driver’s side door, start pushing your car. You can keep one wheel on the steering wheel to ensure that your car goes straight when pushing your car. I recommend keeping your door open and pushing from the windshield pillar. 

Step 5: Once your car reaches between 5 and 10 mph, sit down on the driver seat, place your car in second gear, and quickly release the clutch. 

Step 6: After releasing the clutch, you should hear your engine turn over. Your engine should start after releasing the clutch. If your engine doesn’t start, then you should repeat steps one through five. 

Can You Push Start An Automatic Car With A Dead Battery?

No, you can’t push start an automatic car with a dead battery. Just like you can’t push start an automatic car with a good battery, this won’t change if your battery is dead.

You can’t push start an automatic car due to the construction of the flexplate. The flexplate is attached to the transmission and crankshaft, which won’t allow you to push-start your vehicle.

If you have a dead battery, you want to either charge your battery or jump-start your vehicle to start it.

What Is A Push-Start?

A push-start is a method of starting your vehicle without the assistance of your starter. A push-start is also called a bump start, clutch start, or crash start. 

When you push start a vehicle, you force the combustion engine to turn over until it starts. This is possible because the clutch can manually be engaged firmly against the flywheel. 

The goal is to rotate the flywheel enough times to start your engine. Typically, the flywheel is turned by the starter. When your starter is not functioning properly, you will need to find a way around this. 

 You should try to push-start your manual car if you have a: 

  • Bad Ignition fuse
  • Starter is failing 
  •  Dead or failing car battery
  • Solenoid issues 

Can You Push Start An Automatic Car In Drive?

No, Your automatic transmission vehicle will not start in drive because of the neutral safety switch device. The safety switch only allows an automatic vehicle to start in the park or neutral.

A neutral safety switch device is designed to prevent your automatic vehicle from starting in a selected gear. This device protects your automatic transmission from serious damage while in gear.

Can I Crank My Automatic Car To Make It Start?

In most cases, you can’t crank your automatic car to start your car. Even if you do crank your engine, you will likely need to jump-start your vehicle to turn it on.

Cranking your vehicle engine sends a sign to your starter to rotate your flexplate until the engine starts.
This isn’t possible in most cases if your battery is too weak to rotate your engine flexplate.

Cranking your ignition key when your car can damage your starter in the process of trying to start your vehicle.

Can You Push Start a Car In Reverse?

Yes, you can push start a manual car in reverse. The same process applies to starting a car in neutral as when starting your car in reverse. 

Below are some steps on how you can push-start your car in reverse. 

Step 1: Find a clear area for your vehicle to roll with no interference.

Step 2: Ideally, you want to find somewhere that is flat or with a small incline downwards. You need at least 100 yards of free space to jump-start your vehicle successfully. 

Step 3: Turn your key to the on position and keep it here during the entire process. 

Step 4: Put the  and car in reverse and start pushing your vehicle. 

Step 5: Once your car reaches between 5 and 10 mph, release your clutch quickly. 

Step 6: After releasing the clutch, you should hear your engine turn over. Your engine should start after releasing the clutch. If your engine doesn’t start then, you should repeat steps one through four. 

How To Start An Automatic Car Without A Starter?

No, if your starter is definitely bad, you can start an automatic car with a bad starter. In most cases, when an automatic car is not starting, most people resort to jump-starting their batter. 

Even if you jump-start your vehicle, an automatic car with a bad starter won’t start. 

To start an automatic car with a bad starter, you will need to get your starter replaced or determine what is causing the issues with the starter. 

Something you can do to check your starter includes: 

  • Examine the connections 
  • Examine the engine ground connection 
  • Examine the solenoid cable 
  • Check the corrosion 
  • Hit the starter gently with a hammer or object 
  • Check for damage or issues with the flywheel 

Can You Push Start An Automatic Car With a Bad Starter?

No, you can’t push start an automatic car with a bad starter. Automatic cars can’t be push started. Even with a functioning starter, trying to push start your car will not start your car. 

If you do have a bad starter the best option is to have your starter inspected by a mechanic to determine the issue. In some cases, issues with the starter can be addressed with a few small repairs. 

On the other hand, you may need to replace your starter completely. 

Can You Push Start an Automatic Car in Neutral?

No, you can’t push start an automatic car in neutral. The main reason for this is the automatic cars can’t be push started in any gear. 

Automatic cars can’t be push started due to how the flexplate and crankshaft are connected to the transmission. 

To start an automatic car that is not starting the best option is to try and jump start it. 

Leave a Comment